Water saving nozzles for taps. Same tap, far less water.
Screw-on mist, spray and shower nozzles that bring a tap down from the usual 8–15 litres a minute to between 0.4 and 4 litres. For homes, kitchens, offices, schools, canteens and public washrooms.
- Fits threaded taps
- No tap replacement
- Bulk and custom flows
Mist modeabout 0.5 L/minShower modeabout 4 L/minChoose how the water comes out
Each pattern suits a different job. Dual-mode nozzles give you two in one.
How would you like to shop?
Whatever you already know about your tap, there is a quick way in.
I know my tap thread
Pick nozzles that fit F24, M22, F18, F20 or the standard 22 mm tap straight away.
I know the flow I want
Browse mist, spray, shower and dual-mode nozzles with flows and savings side by side.
Help me choose
Answer three questions about your tap and its use. We shortlist the models that fit.
Most-asked-for nozzles
Prices depend on quantity and thread – add models to your quote list and we will send a quotation.
Same washing, a fraction of the water
A normal aerator lets 8–15 litres a minute through, depending on pressure. Most of it never touches your hands.
- 1
Unscrew the old aerator
By hand – it is the small cap at the mouth of the tap.
- 2
Screw on the nozzle
Use the adapter that matches your thread if needed. No tap replacement.
- 3
Use mist for washing
Switch to spray or shower on a dual-mode nozzle when you need to fill something.
Explore by application
Start with where the tap is and how it is used.
Home bathrooms
Basins used for hand-washing and brushing – dual-mode or mist.
Kitchens
Volume for filling and vessels – dual-mode, spray or TTS4.
Offices & public washrooms
High-traffic basins – mist and anti-theft models.
Schools, canteens & malls
Many taps, many users – bulk and custom flows.
Before you buy
Short, practical answers for homeowners, facility managers and plumbers.
Fitting out a building or campus?
Offices, schools, hostels, hospitals, malls and canteens: tell us the number of taps and their threads. We can supply in bulk and make custom flow rates.
Greenly nozzles, plus Altered from Sweden
The TrueMist, TrueSpray, True Tap Shower and Atomizer nozzles are made by Greenly. We also supply Altered:Nozzle water savers from Sweden.
Questions people ask before buying
Which should I choose – mist, spray or shower?
Mist saves the most and suits hand-washing basins. Spray suits kitchens and canteens. Shower gives a fuller feel. If one tap does many jobs, a dual-mode nozzle gives you mist and a stronger flow.
Does it fit my existing tap?
Most threaded taps, yes. TrueMist Twister ships with adapters for F24, M22, F18 and F20 threads; Altered:Nozzle ships with adapters for Standard (20.8 mm), Junior (18.1 mm) and Tom Thumb (15 mm) sockets; TrueSpray, True Tap Shower and Atomizer fit the standard 22 mm M24/F24 tap.
Does a mist nozzle really save that much water?
Yes. From a normal tap most of the water runs straight past your hands into the drain. A mist breaks the same water into fine droplets that reach your skin, so a much smaller flow does the same washing – and the speed of the mist rinses soap off easily.
What water pressure do the nozzles need?
The Greenly nozzles are rated 1 to 6 bar. The Altered:Nozzle dual-flow models need at least 3 bar, and the Altered:Nozzle Dome works from 1.5 bar.
Does a water saving nozzle need maintenance?
Yes, a little. Sediment and particles in the water collect in the filter, so remove the nozzle and clean the filter about once every 15 days.
What is the warranty?
One year from the date you receive the nozzle, against manufacturing defects.
Will a nozzle work with an overhead tank and no pump?
The TrueMist Twister and Atomizer are rated for gravity-fed (pressure-less) lines. The Altered models are not suitable for pressure-less systems; on tank-fed lines it depends on the height of the tank.
Can you make a nozzle with a different flow rate?
Yes. Mist flows can be made between 300 ml and 1 L/min, TrueSpray between 1 and 2 L/min, and True Tap Shower between 2 and 4 L/min. For the TrueMist 500, custom flows are for orders above 30 pieces.
Ask for a quote or a recommendation
Your quotation request
Talk to a person
Real people, not a call centre. A photo of your tap on WhatsApp is the quickest way to the right model.
- Phone+91 93630 47778
- WhatsApp+91 93630 47778
- Emailcontact@synergyautomatics.in
- AddressAmbattur, Chennai, Tamil Nadu, India
- Hours10:00 am – 5:30 pm





