Water savings calculator
Estimate the litres a water saving nozzle saves at your taps – per day, per month and per year. Change the numbers to match your building.
- Uses published nozzle flows
- Works for homes and buildings
- Nothing is stored
The calculator needs JavaScript
As a rule of thumb: a tap running at 8 L/min for 20 seconds uses about 2.7 litres; at 0.5 L/min it uses under 0.2 litres.
The arithmetic, in plain words
Water used = number of taps × uses per tap per day × seconds per use × flow rate. The calculator works this out for your current tap and for the nozzle you pick, then shows the difference.
The flow for a normal aerator depends on pressure – roughly 8 L/min at low pressure and up to 15 L/min on pumped lines. If you have measured your tap (time how long it takes to fill a 1-litre bottle), enter that instead.
The nozzle flows are the makers' published figures. Real flow varies with pressure, so treat the result as an estimate.
Questions about savings
Does a mist nozzle really save that much water?
Yes. From a normal tap most of the water runs straight past your hands into the drain. A mist breaks the same water into fine droplets that reach your skin, so a much smaller flow does the same washing – and the speed of the mist rinses soap off easily.
How do I measure the water pressure at my tap?
Ask a plumber to measure it, or fit a pressure gauge. At household taps it usually varies between 1.5 and 5 bar.
