Skip to content
Tap water savers for homes and buildingsGreenly nozzles · Altered (Sweden)

Guide · 5 min read

How water saving nozzles work

A water saving nozzle is a small attachment that screws onto the thread at the mouth of a tap, in place of the aerator. Here is how it cuts the flow without spoiling the wash.

What a normal aerator does

The aerator on a typical tap mixes a little air into the stream and stops splashing, but it does not limit the flow. The flow rises with the pressure in the line, so a normal aerator lets through anywhere between 8 and 15 litres a minute.

For washing hands or brushing teeth, most of that water never touches you – it runs past your hands and straight down the drain.

What a water saving nozzle changes

A water saving nozzle limits the flow and reshapes it. It splits the water into many small streams or droplets, so a much smaller amount covers the same area. You get the same rinse with a fraction of the water.

The three patterns

Pattern What it feels like Typical flow Best for
Mist Fine droplets; the largest saving 0.4–0.7 L/min Hand-wash basins, brushing, rinsing
Spray A soft umbrella spray 1–2 L/min Kitchens, canteens, wash areas
Shower A gentle shower pattern 2–4 L/min Basins and kitchens where a fuller flow is wanted

Single mode or dual mode?

Single-mode nozzles have one fixed flow – nothing for users to change, which suits public washrooms. Dual-mode nozzles add a second, stronger flow: mist for washing, spray or shower for filling. You switch with a twist (TrueMist Twister), a pull (Atomizer) or a handle (Altered:Nozzle).

Why mist rinses so well

Breaking water into droplets gives each drop its own surface, so far more of the water actually touches your skin. The speed of the mist also lifts soap off quickly – which is how a mist nozzle at 0.5 L/min can do the work of a stream at 8 L/min.

Pressure matters

Every nozzle has a working pressure range. The Greenly nozzles are rated 1 to 6 bar and the TrueMist Twister and Atomizer also work on gravity-fed (overhead tank) lines. The Altered dual-flow models need at least 3 bar. Above 2.5 bar the Atomizer needs its regulator.

Looking after a nozzle

Remove the nozzle and clean its filter about every 15 days, more often if your water carries sediment. If scale builds up, soak it in vinegar overnight.

Products mentioned

Nozzles by pattern

All nozzles

FAQs

Common questions

Does a mist nozzle really save that much water?

Yes. From a normal tap most of the water runs straight past your hands into the drain. A mist breaks the same water into fine droplets that reach your skin, so a much smaller flow does the same washing – and the speed of the mist rinses soap off easily.

Is the flow adjustable?

Dual-mode nozzles – TrueMist Twister, Atomizer and the Altered:Nozzle models – switch between mist and spray or shower. Single-mode nozzles have one fixed flow.

Which should I choose – mist, spray or shower?

Mist saves the most and suits hand-washing basins. Spray suits kitchens and canteens. Shower gives a fuller feel. If one tap does many jobs, a dual-mode nozzle gives you mist and a stronger flow.

Does a water saving nozzle need maintenance?

Yes, a little. Sediment and particles in the water collect in the filter, so remove the nozzle and clean the filter about once every 15 days.

Help choosing

Not sure which nozzle fits your tap?

Send us a photo of the tap on WhatsApp, or tell us where it will be used and how many taps. We will suggest the right model and adapter and send a quotation.