Water saving nozzle FAQs
Everything people ask us about choosing, fitting and looking after tap water savers.
Choosing a nozzle
Which should I choose – mist, spray or shower?
Mist saves the most and suits hand-washing basins. Spray suits kitchens and canteens. Shower gives a fuller feel. If one tap does many jobs, a dual-mode nozzle gives you mist and a stronger flow.
Which nozzle is best for a kitchen sink?
Kitchens need volume for filling and washing vessels, so choose a dual-mode nozzle (Atomizer or TrueMist Twister), TrueSpray 2 or True Tap Shower TTS4.
Is the flow adjustable?
Dual-mode nozzles – TrueMist Twister, Atomizer and the Altered:Nozzle models – switch between mist and spray or shower. Single-mode nozzles have one fixed flow.
Does a mist nozzle really save that much water?
Yes. From a normal tap most of the water runs straight past your hands into the drain. A mist breaks the same water into fine droplets that reach your skin, so a much smaller flow does the same washing – and the speed of the mist rinses soap off easily.
Can you make a nozzle with a different flow rate?
Yes. Mist flows can be made between 300 ml and 1 L/min, TrueSpray between 1 and 2 L/min, and True Tap Shower between 2 and 4 L/min. For the TrueMist 500, custom flows are for orders above 30 pieces.
Fitting and tap sizes
Does it fit my existing tap?
Most threaded taps, yes. TrueMist Twister ships with adapters for F24, M22, F18 and F20 threads; Altered:Nozzle ships with adapters for Standard (20.8 mm), Junior (18.1 mm) and Tom Thumb (15 mm) sockets; TrueSpray, True Tap Shower and Atomizer fit the standard 22 mm M24/F24 tap.
How do I find out the size of my tap?
Hold a measuring scale under the tap and measure the outlet diameter, or remove the aerator or adapter ring and measure the thread. Our tap thread guide walks you through it.
Can I use a water saving nozzle on a tap without a thread?
No. The nozzles screw onto the tap's aerator thread, so taps without a thread cannot take them.
My tap has a concealed (cache) aerator. Will a nozzle fit?
Unfortunately not. You need a tap with a detachable socket for a removable aerator.
Do I need tools to install it?
Usually not – unscrew the old aerator by hand and screw the nozzle on. The Altered:Nozzle includes a hex key to secure its handle.
Is the installation different for each model?
No. Every model fits the same way: remove the existing aerator, add an adapter if your thread needs one, and screw the nozzle on.
Pressure and water supply
What water pressure do the nozzles need?
The Greenly nozzles are rated 1 to 6 bar. The Altered:Nozzle dual-flow models need at least 3 bar, and the Altered:Nozzle Dome works from 1.5 bar.
How do I measure the water pressure at my tap?
Ask a plumber to measure it, or fit a pressure gauge. At household taps it usually varies between 1.5 and 5 bar.
Will a nozzle work with an overhead tank and no pump?
The TrueMist Twister and Atomizer are rated for gravity-fed (pressure-less) lines. The Altered models are not suitable for pressure-less systems; on tank-fed lines it depends on the height of the tank.
Do I need a pressure regulator?
Only for the Atomizer when the pressure at the tap is above 2.5 bar, which is common with booster pumps. The regulator is supplied in its retail pack.
Can I get more water in spray mode on the Altered:Nozzle?
Yes – remove the restrictor plug on top of the nozzle. The instruction manual in the pack shows how.
Care, water quality and warranty
Does a water saving nozzle need maintenance?
Yes, a little. Sediment and particles in the water collect in the filter, so remove the nozzle and clean the filter about once every 15 days.
Will it work with hard or salty water?
Yes. The nozzles are brass with a chrome or nickel finish. As with any tap fitting, scale builds up over time – soak the nozzle in vinegar overnight, clean it and refit it.
Our water quality is poor. Will that affect the nozzle?
The nozzles have a particle filter and are easy to take apart and rinse. Very heavy sediment will need more frequent cleaning.
What finishes are available?
Chrome or nickel finish. The Altered:Nozzle is available in chrome only.
What is the warranty?
One year from the date you receive the nozzle, against manufacturing defects.
Ordering
How do I order?
Add nozzles to your quote list and send the request, call or WhatsApp us, or use the enquiry form. The Altered:Nozzle can also be bought directly on Amazon India.
Do you deliver to my city?
Tell us your city and PIN code when you enquire and we will confirm dispatch and delivery with the quotation.
Didn't find your answer?
Send an enquiry
Talk to a person
Real people, not a call centre. A photo of your tap on WhatsApp is the quickest way to the right model.
- Phone+91 93630 47778
- WhatsApp+91 93630 47778
- Emailcontact@synergyautomatics.in
- AddressAmbattur, Chennai, Tamil Nadu, India
- Hours10:00 am – 5:30 pm